Subscribe

Stay Current

Receive notice of new reports and other news from MCEER

Experimental and Analytical Study of a Hybrid Isolation System Using Friction Controllable Sliding Bearings

M.Q.Feng, S.Fujii, M.Shinozuka

NCEER-92-0009 | 5/15/1992 | 108 pages

About the Report:

TOC: The table of contents is provided.

Keywords: Hybrid Sliding Isolation Systems, Control Algorithms, Bang Bang Control, Friction Controllable Bearings, Correlation Studies, Hybrid Control Systems, Instantaneous Optimal Control, Shaking Table Tests, Response Analysis, Analytical Models, and Friction Sliding Bearings.

Abstract: This study deals with a hybrid sliding isolation system (HBIS) using friction controllable sliding bearings. This system controls the friction force on the sliding interface between the supported structure and the ground, by adjusting the pressure in a bearing chamber, to confine the sliding displacement within an acceptable range, while keeping the transfer of seismic force to a minimum. Instantaneous optimal control and bang-bang control algorithms are developed for controlling the friction force. The effectiveness of the algorithms is demonstrated by shaking table experiments and computer simulation. An HBIS using friction controllable bearings is fabricated and shaking table experiments are performed using a rigid structural model equipped with such a hybrid system. The dynamic characteristics of the control system for bearing pressure and sliding friction are identified, and the advantage of the HBIS over the passive system is demonstrated by experiments. Computer codes for simulation of structural response under passive or hybrid control are developed. The numerically simulated results show good agreement with the experimental results, verifying that the analytical model developed represents the actual system very well.